Makita 40V max XGT Brushless Cordless 1-1/8 in. AVT Rotary Hammer (D-Handle) 4.0Ah Kit, and 5" X-LOCK Paddle Switch Angle Grinder (Bare Tool)

Makita GRH07M1 40V max XGT Brushless Cordless 1-1/8 in. AVT Rotary Hammer (D-Handle) 4.0Ah Kit, AFT, AWS Capable

OUTPOWER. OUTSMART. OUTLAST.

The 40V max XGT Brushless 1-1/8" AVT Rotary Hammer Kit (GRH07M1) is a cordless concrete solution engineered for heavy-load applications. It delivers the power, speed, and run-time for corded demands, and features a convenient D-handle design that is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications.

The Makita-built brushless motor delivers a full 2.7 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance.

Its equipped with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT) is engineered for improved dust and water resistance.

The rotary hammer has dust extraction capability with an OSHA Table 1 compliant on-board HEPA dust extractor attachment (model DX15, sold separately). Users many also use a standalone dust extractor with Auto-Start Wireless System (AWS). AWS uses Bluetooth technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.

The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Additional performance features include an electric brake, variable speed dial, built-in L.E.D. light, and a tethering loop/hanging hook to help secure the tool when working at heights or on a lift.

It is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.

XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

• OUTPOWER: Makita-built brushless motor along with 40V max XGT battery combine to deliver the power performance required for heavy-load application
• OUTSMART: Constant speed control automatically applies additional power under load for optimum performance
• OUTLAST: Overload protection is designed to protect the motor from burnout in abnormally high torque situations
• Active Feedback-Sensing Technology (AFT) electronically turns off the motor if rotation of bit is suddenly forced to stop
• Anti-Vibration Technology (AVT) is designed to reduce vibration for increased comfort
• Dust extraction capability with optional OSHA Table 1 compliant on-board HEPA Dust Extractor or stand-alone AWS Extractor
• Auto-Start Wireless System (AWS) which utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)
• Electric brake allows the tool to be repositioned faster for maximum productivity
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
• Variable speed trigger enables user to match the speed to the application
• D-handle design is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications
• Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
• Built-in L.E.D. light with an independent on/off illuminates the work area
• Tethering loop/hanging hook helps secure the tool when working at heights or on a lift (sold separately)
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
• Multiple bit angles allow the bit to be set at different positions for increased comfort
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT Rapid Chargers digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Chargers built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• Compatible with Makita 40V max XGT Lithium-Ion Batteries

Makita GAG13Z 40V MAX XGT Brushless Cordless 5" X-LOCK Paddle Switch Angle Grinder, Electric Brake, Tool Only

Product Summary

Makita delivers grinding performance with the 40V max XGT Brushless 5" X-LOCK Paddle Switch Angle Grinder Kit, with Electric Brake (GAG13M1). The Makita-built brushless motor along with 40V max XGT battery combine to deliver powerful grinding and up to 60% faster cutting speed than previous models*. The X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out. It is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more. The large paddle switch allows for power start press points at multiple grip positions. The GAG13Z is powered by a Makita-built brushless motor for longer run time, increased power and speed, and longer tool life. The Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life. Active Feedback-sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. The Angle Grinder features an electronic current limiter that helps protect the motor from overload in high torque applications, it also features quick guard rotation that allows easy tool-less adjustment for increased productivity, spiral bevel gears for smoother rotations, and a more efficient transfer of energy, as well as soft start which suppresses the grinder's start-up reaction for smooth start-ups and longer gear life. Convenience features include a rubberized soft grip which provides increased comfort on the job, and a compact size of only 16-3/4" which increases user comfort and allows operation in tight spaces. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest. *Makita XAG04 cutting #5 (5/8") rebar

Features

• OUTPOWER: Makita-built brushless motor along with 40V max XGT battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models*
• OUTSMART: X-LOCK quick change system allows for tool-free wheel changes with an easy snap-on mounting and fast change-outs by simply pulling a release lever
• OUTLAST: Electronic current limiter helps protect the motor from overload in high torque application
• Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
• Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop
• Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on
• Large paddle switch allows for power start press points at multiple grip positions
• Quick guard rotation allows easy tool-less adjustment for increased productivity
• Soft start suppresses start-up reaction for smooth start-ups and longer gear life
• Spiral bevel gears for smoother rotations and a more efficient transfer of energy
• Reinforced metal gear housing engineered for maximum job site durability
• Wire mesh intake covers are engineered to prevent debris from entering motor
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Rubberized soft grip provides increased comfort on the job
• Compact at only 16-1/8" long; ideal for tight spaces
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
• The XGT Rapid Charger's digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Charger's built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• Compatible with Makita 40V max XGT Lithium-Ion Batteries
• Only use genuine Makita batteries and chargers
• 3-year limited warranty